Update: New login password found! Read all about it here.
When P1 W1MAX was launched with its DS300 LAN based modem, it claims to be a pure Plug & Play device with no configuration needed. All the user has to do is simply connect the power & LAN cable and they are ready to surf (provided that their network settings are set as AUTO by default).
However this seems to be a barrier for gamers and network experts that require manual network tweaking to get the best performance for selected applications. Settings such as Port Forwarding, DMZ and DHCP is simply not possible as the web admin access for the modem is not given out.
Fortunately, a lowyat.net user by the name of yong888 has obtained the username/password for the DS300 and it was very generous for him to share it on a public forum.
To access the P1 W1MAX DS300 Web Admin, enter http://10.1.1.254 on your web browser. Login using the following:
Username: p1admin
Password: 769973
Password has been changed after firmware upgrade. Please read more here.
Here’s a trivia, the password is actually the company number for P1.COM SDN BHD (769973-T).
Once you’re in, you will have access to all the network status/settings you would need to configure your WiMAX connection according.
Editor’s Note: We do not encourage amendments to your default DS300 settings. Do not proceed unless you are fully aware of what you’re doing. Soyacincau is not responsible if your service is suspended or interrupted as a result of your own changes to the settings.
The options in the DS300 Web Admin are as follows:
- Status
- WiMAX Status
- Network Status
- Device Status
- Personalization
- Account
- Date
- WiMAX
- Scanner
- Authentication
- Networking
- Bridge/NAT Mode
- Firewall
- DHCP Server
- NAT ALG
- Port Forwarding
- Port Trigger
- DDNS
- Management
- TR-069
- Log
- Upgrade
- Recovery
- Logout
- Reboot
For those who are still unable to find the best WiMAX Base Station direction, yong888 has mentioned that the lower RSSI value as shown above would indicate better reception. With this, you can try different placements and see which gives you better signal.
[ SOURCE ]